Blog
June 15, 2026
There is still a debate about how to 3D print critical parts. This infographic provides a partial answer, showing our results. But if you are going
June 5, 2026
On Wednesday, June 3, a presentation of the results of individual tasks within the NCK was held in Prague. For our task 3D printing and HIP,
March 4, 2026
TAČR (Technology Agency of the Czech Republic)– I have been an evaluator of R&D projects for several years now. It is an interesting activity because it
January 10, 2026
It’s a strange topic. When I started at ZEZ Praha, VVZ Liberec, I was in charge of the development of PVD technologies and the Leybold device
December 18, 2025
When I learned that we have another HIP from Quintus in the Czech Republic, I didn’t hesitate and went there. Just old curiosity. A big surprise
September 24, 2025
Our research consortium will present at the NCK Days in Liberec. This time, Assoc. Prof. Tomáš Čegan, CSc. will present preliminary results from the development of
May 23, 2025
When I wrote my blog on LPCN (Low Pressure CarboNitriding), I had no idea it would get such a response. However, I was just trying to
March 16, 2025
Together with VŠB-TUO Ostrava (Technical University Ostrava) and Galvamet, we set out to verify the necessary technology for printing inserts of die casting dies according to
February 28, 2025
It will be two years since we, Galvamet and VŠB, started 3D printing. The main motive for me was that since I organized a seminar on
October 19, 2024
On 15 and 16 October, a meeting of NCK, the engineering consortium, took place at Comtes FHT in Dobřany. Together with my colleague Tomáš Čegan, we
October 9, 2024
Next week, Galvamet together with VŠB Ostrava will submit the first accounts of the development of Dievar 3D printing with the support of HIP. The results
June 18, 2024
Yesterday I attended the general assembly of NCK Strojírenství led by Professor Ing. Miroslav Václavík, CSc. It was such a continuous test of what has been
March 15, 2024
Bivoj … When everyone says this name, Czech history comes to mind. But this name is borne by an in laser entered in the Guinness Book
November 21, 2023
So glory, we already have the first samples … the next step is HIP Jiří Stanislav November 21, 2023
September 12, 2023
Economizing printing with HIP technology …. that’s how we’ve already started Jiří Stanislav September 12, 2023
May 31, 2023
Project Optimizing the properties of titanium alloy implants prepared by 3D printing by applying the HIP process Solvers: Technical University in Ostrava Galvamet spol s r.o.
April 6, 2023
Representing the ECM company gives me an insight into the new world of heat treatment, especially in the field of low pressure carburizing. But in fact,
March 7, 2023
For those interested, a seminar on Development of modern metal components for special applications March 7 , 2023 Jiří Stanislav
January 17, 2023
So my dream came true, I finally saw our one and only HIP for science and research. It is located at the workplace of the Faculty
December 15, 2022
The announced entry of Galvamet into the field of science and research is starting to come true. Yesterday, the first working meeting was held with the
December 10, 2022
Czechimplant, led by Jana Vykoukalová, received the “Golden Cluster” award for 2021 within the framework of the National Cluster Association. One can only congratulate. http://czechimplant.cz/novinky https://www.linkedin.com/feed/update/urn:li:activity:7006890438829711360/
December 3, 2022
At the conference in Jihlava, I expressed my opinion on the state of 3D printing in the Czech Republic. This video was posted on HeaTreatToday. I
October 14, 2022
This week was really well filled, from Rzeszów right to the National Center of Competence – Engineering meeting. The introduction and conclusion belonged to Mr. Ing.
September 13, 2022
Galvamet is embarking on a journey of science and research, so good luck September 13, 2022 Jiří Stanislav
May 13, 2022
I was interested in the invitation, simply because the main players were Škoda Auto, Josef Průša, Jan Homola, 3Dees, 3Dwiser, Stratasys, Fillamentum, CIIRC CTU in Prague,