{"id":5149,"date":"2023-03-16T16:06:02","date_gmt":"2023-03-16T16:06:02","guid":{"rendered":"https:\/\/www.jstconsultancy.cz\/?p=5149"},"modified":"2026-08-01T07:57:50","modified_gmt":"2026-08-01T07:57:50","slug":"nadca-207-and-input-material-quality-control-in-class-2","status":"publish","type":"post","link":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/en\/nadca-207-and-input-material-quality-control-in-class-2\/","title":{"rendered":"Nadca 207 and incoming material quality control in Class 2"},"content":{"rendered":"

 <\/p>\n

Materials purchased in Class 2<\/u><\/strong><\/p>\n

In this case Nadca 207 says nothing. Even so, the steel should have the same quality as in the case of Class 1, with all levels of its quality assessment, except for impact tests.<\/p>\n

\"\"<\/a><\/p>\n

Fig. 1<\/em><\/strong> \u2013 Nadca 207 – mandatory ratings for die steels<\/em><\/p>\n

How to deal with it? Here, each tool shop probably has to set its own priorities. If this type of purchase were to apply to critical die parts, we run the risk of sending steel to production from the 18% that represents unsuitable material. So, I would strongly recommend going at least the Class 1 route and with archiving. After all, luck only favours those who are prepared.<\/p>\n

Where critical parts are not involved, there are several options.<\/p>\n

We cut a sample from each delivered piece and evaluate it for satisfactory\/unsatisfactory annealed structures. That’s how \u0160koda-Auto did it for a long time, when my doctore thesis supervisor, Doc. Ing. Ji\u0159\u00ed Horyna, CSc. did an initial metallographic assessment for them.<\/p>\n

\"\"<\/a><\/p>\n

Fig.2 <\/em><\/strong>\u00a0\u2013 Part ot the quality report signed by \u00a0Doc. Ing. Ji\u0159\u00edho Horyny, CSc, <\/em><\/p>\n

If the steel quality is really worthless, it can be recognized. See Figure #3 with the AS10 structure.<\/p>\n

\"\"<\/a><\/p>\n

Fig. 3<\/em><\/strong> \u2013 Microstructure from the laboratory of Doc. Ing. Horyny, CSc. rated AS10.<\/em><\/p>\n

Today, however, such an analysis can be carried out even without cutting the sample, e.g. using a Keyence digital microscope. The digital camera is portable, with a cable length of up to 20 m. If we grind, polish and etch the test spot on the surface of the block, we can see exactly the same as on the optical microscope. This microscope can easily handle the 500x magnification we need for evaluation, and we can do it anywhere in the tool shop hall.<\/p>\n

\"\"<\/a>\"\"<\/a><\/p>\n

Fig. 4<\/em><\/strong> \u2013 Keyence digital microscope and evaluated structure at 500x magnification<\/em><\/p>\n

There is other, let’s say hybrid methods. On the back side of the matrix, 3 test rollers are machined with a crown cutter. The first is kept by the tool shop as witness material for immediate or future verification of input quality, the second is evaluated after heat treatment, and the third goes with the die to the foundry.<\/p>\n

\"\"<\/a><\/p>\n

Fig. 5<\/em><\/strong> \u2013 Method of 3 samples for retrospective evaluation of input material quality, heat treatment and foundry behaviour<\/em><\/p>\n

But the problem arises in the case of evaluation. The image of the structure on the metallographic surface may indicate defects, but it will never say anything about the actual mechanical properties of the steel. So, in some cases it can help, especially when the etched structure will point to unacceptable annealed ASxx structures or structures after hardening HSxx, but often it will only raise a discussion between the interpretation of individual structures without a clear conclusion. Especially when the structures looks OK<\/strong> but the result is not OK<\/strong>.<\/p>\n

 <\/p>\n

March 17 , 2023<\/p>\n

Ji\u0159\u00ed Stanislav<\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

  Materials purchased in Class 2 In this case Nadca 207 says nothing. Even so, the steel should have the same quality as in the case<\/p>\n","protected":false},"author":12,"featured_media":5166,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"image","meta":{"_acf_changed":false,"footnotes":""},"categories":[322],"tags":[],"class_list":["post-5149","post","type-post","status-publish","format-image","has-post-thumbnail","hentry","category-nadca-207-en","post_format-post-format-image"],"acf":[],"yoast_head":"\nNadca 207 and incoming material quality control in Class 2 - JST Consultancy<\/title>\n<meta name=\"robots\" content=\"noindex, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<meta property=\"og:locale\" content=\"cs_CZ\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Nadca 207 and incoming material quality control in Class 2 - JST Consultancy\" \/>\n<meta property=\"og:description\" content=\"  Materials purchased in Class 2 In this case Nadca 207 says nothing. Even so, the steel should have the same quality as in the case\" \/>\n<meta property=\"og:url\" content=\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/\" \/>\n<meta property=\"og:site_name\" content=\"JST Consultancy\" \/>\n<meta property=\"article:published_time\" content=\"2023-03-16T16:06:02+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-08-01T07:57:50+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/03\/class2-1.png\" \/>\n\t<meta property=\"og:image:width\" content=\"354\" \/>\n\t<meta property=\"og:image:height\" content=\"357\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Ji\u0159\u00ed Stanislav\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Napsal(a)\" \/>\n\t<meta name=\"twitter:data1\" content=\"Ji\u0159\u00ed Stanislav\" \/>\n\t<meta name=\"twitter:label2\" content=\"Odhadovan\u00e1 doba \u010dten\u00ed\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minuty\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/\"},\"author\":{\"name\":\"Ji\u0159\u00ed Stanislav\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da\"},\"headline\":\"Nadca 207 and incoming material quality control in Class 2\",\"datePublished\":\"2023-03-16T16:06:02+00:00\",\"dateModified\":\"2026-08-01T07:57:50+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/\"},\"wordCount\":477,\"image\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/03\/class2-1.png\",\"articleSection\":[\"Nadca 207\"],\"inLanguage\":\"cs\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/\",\"url\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/\",\"name\":\"Nadca 207 and incoming material quality control in Class 2 - JST Consultancy\",\"isPartOf\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/03\/class2-1.png\",\"datePublished\":\"2023-03-16T16:06:02+00:00\",\"dateModified\":\"2026-08-01T07:57:50+00:00\",\"author\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da\"},\"breadcrumb\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#breadcrumb\"},\"inLanguage\":\"cs\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"cs\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#primaryimage\",\"url\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/03\/class2-1.png\",\"contentUrl\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/03\/class2-1.png\",\"width\":354,\"height\":357},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Nadca 207 and incoming material quality control in Class 2\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#website\",\"url\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/\",\"name\":\"JST Consultancy\",\"description\":\"Tepeln\u00e9 zpracov\u00e1n\u00ed kov\u016f, expertn\u00ed \u010dinnost, ekonomick\u00e9 anal\u00fdzy kal\u00edren, \u0161kolen\u00ed tepeln\u00e9ho zpracov\u00e1n\u00ed\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"cs\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da\",\"name\":\"Ji\u0159\u00ed Stanislav\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Nadca 207 and incoming material quality control in Class 2 - JST Consultancy","robots":{"index":"noindex","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"og_locale":"cs_CZ","og_type":"article","og_title":"Nadca 207 and incoming material quality control in Class 2 - JST Consultancy","og_description":"  Materials purchased in Class 2 In this case Nadca 207 says nothing. Even so, the steel should have the same quality as in the case","og_url":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/","og_site_name":"JST Consultancy","article_published_time":"2023-03-16T16:06:02+00:00","article_modified_time":"2026-08-01T07:57:50+00:00","og_image":[{"width":354,"height":357,"url":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/03\/class2-1.png","type":"image\/png"}],"author":"Ji\u0159\u00ed Stanislav","twitter_card":"summary_large_image","twitter_misc":{"Napsal(a)":"Ji\u0159\u00ed Stanislav","Odhadovan\u00e1 doba \u010dten\u00ed":"4 minuty"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#article","isPartOf":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/"},"author":{"name":"Ji\u0159\u00ed Stanislav","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da"},"headline":"Nadca 207 and incoming material quality control in Class 2","datePublished":"2023-03-16T16:06:02+00:00","dateModified":"2026-08-01T07:57:50+00:00","mainEntityOfPage":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/"},"wordCount":477,"image":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#primaryimage"},"thumbnailUrl":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/03\/class2-1.png","articleSection":["Nadca 207"],"inLanguage":"cs"},{"@type":"WebPage","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/","url":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/","name":"Nadca 207 and incoming material quality control in Class 2 - JST Consultancy","isPartOf":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#website"},"primaryImageOfPage":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#primaryimage"},"image":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#primaryimage"},"thumbnailUrl":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/03\/class2-1.png","datePublished":"2023-03-16T16:06:02+00:00","dateModified":"2026-08-01T07:57:50+00:00","author":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da"},"breadcrumb":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#breadcrumb"},"inLanguage":"cs","potentialAction":[{"@type":"ReadAction","target":["https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/"]}]},{"@type":"ImageObject","inLanguage":"cs","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#primaryimage","url":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/03\/class2-1.png","contentUrl":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/03\/class2-1.png","width":354,"height":357},{"@type":"BreadcrumbList","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-vstupni-kontrola-jakosti-materialu-v-tride-class-2\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/"},{"@type":"ListItem","position":2,"name":"Nadca 207 and incoming material quality control in Class 2"}]},{"@type":"WebSite","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#website","url":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/","name":"JST Consultancy","description":"Tepeln\u00e9 zpracov\u00e1n\u00ed kov\u016f, expertn\u00ed \u010dinnost, ekonomick\u00e9 anal\u00fdzy kal\u00edren, \u0161kolen\u00ed tepeln\u00e9ho zpracov\u00e1n\u00ed","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"cs"},{"@type":"Person","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da","name":"Ji\u0159\u00ed Stanislav"}]}},"_links":{"self":[{"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/posts\/5149","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/comments?post=5149"}],"version-history":[{"count":2,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/posts\/5149\/revisions"}],"predecessor-version":[{"id":5168,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/posts\/5149\/revisions\/5168"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/media\/5166"}],"wp:attachment":[{"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/media?parent=5149"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/categories?post=5149"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/tags?post=5149"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}