Fig. 1 and 2 – Examples of devices for measuring consumption and 1\/4 hour maximum<\/u><\/em><\/p>\n Only if the above is fulfilled and we have input data, we will create a consumption matrix for the entire heat treatment shop for future consumption planning, and for actual consumption recording, \u00a0according to what we have measured. The device matrix can be, for example, in the form below, it is only up to the evaluator’s invention.<\/p>\n From the table above, from the<\/strong> values for planning<\/strong>, we can plan the values for the demand diagram with the energy provider, and from the table of actual values<\/strong>, we can then perform other analyses needed to evaluate the energy consumption of our production or to evaluate the efficiency of individual appliances.<\/p>\n For example just evaluating how much production we make from 1 CZK spent on energy for our thermal processing can be a very simple but illustrative indicator of the success of the heat treatment plant. In our theoretical case, we set an annual goal of obtaining sales of CZK 6.50 from every CZK spent on energy. On the basis of our measures, we can then monitor how this affects the efficiency of the plant. If we measure and have a connection to the ERP system, we can create such a diagram for each furnace involved in the turnover.<\/p>\n The situation is different with reserved capacity. According to the definition, reserved capacity is the contractually agreed value of the maximum quarter-hourly electrical output in kW<\/strong>, which the customer may take from the distribution network at one point of consumption. In practice, this value corresponds to the simultaneous sampling of individual furnaces and appliances in the heat treatment plant, and is an important invoicing parameter. If we negotiated too high values, then we are paying for something we did not take. If we agreed on values that are too low, we risk being penalized for exceeding the agreed values.<\/p>\n We estimate the reserved capacity based on the past, from the supplier’s invoices, but if we want to reduce it in a targeted way, we have to measure it<\/strong>. There is no other option. In practice, this means that in the measurement system we will set our desired value to \u00bc of the maximum, and we will put a large display with a copy of the screen and an audio signal in the hall of the heat treatment plant. If in the first minutes of the measured quarter of an hour we begin to approach the state where we would exceed the value, the system will alert us.<\/p>\n Interventions in the furnaces cannot be carried out automatically, no SW currently recognises whether we can intervene in the program of the furnace or not. We have to do this manually or the operators must go around the hall and, where the consumption can be reduced without impacting the resulting technology, they will reduce the start-up ramp in the program step or suspend the heating of the furnace by switching to an extraordinary hold. Central dispatching and control of furnaces from one place is an advantage.<\/p>\n An interesting article on this topic was published on Industrial Heating<\/strong>. Here, the authors dealt with the relationship between the total consumption of the furnace during the warm-up at different heating ramps, and the impact on the reserved capacity.<\/p>\n https:\/\/www.industrialheating.com\/articles\/89871-minimizing-electrical-power-costs-in-operating-vacuum-furnaces<\/a><\/p>\n 3 different temperature ramps were tested on a vacuum furnace with a charge of 1000 lb, approx. 500 kg. 10 F\/min = 5,55 C\/min, 15 F\/min = 8,33 C\/min a 20 F\/min = 11,1 C\/min <\/strong><\/p>\n The interpretation of the result is that the highest heating speed of 20 F\/min gives lower consumption, because the heating times are shorter, but the \u00bc maximum will be up to 194 kW compared to the value of 135 kW at a speed of 10 F\/min, i.e. 43.7% higher.<\/p>\n If we use CEZ rates for reserved capacity and an hourly consumption rate of CZK 5\/kWh, we get the following values:<\/p>\n VVN \u2013 Very high tension, VN \u2013 High tension<\/em><\/p>\n Ramp 10 F\/min, reserved capacity at minimum level 135 kW<\/u><\/strong><\/p>\n \u00a0<\/u><\/strong><\/p>\n Consumption: \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 280 kWh * 5 = 1 400 K\u010d<\/p>\n Payment for the reserved capacity of 135 kW:\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0176 388 * 0,135 = 23 812 K\u010d<\/p>\n Total: \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 1\u00a0400 + 23\u00a0812 = 25\u00a0212 K\u010d<\/strong><\/p>\n <\/p>\n Ramp 20 F\/min, reserved capacity at maximum level 194 kW<\/u><\/strong><\/p>\n Consumption: \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 230 kWh * 5 = 1 150 K\u010d<\/p>\n Payment for the reserved capacity of 194 kW:\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0176 388 * 0,194 = 34 219 K\u010d<\/p>\n Total: \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 1\u00a0150 + 34 219 = 35 369 K\u010d<\/strong><\/p>\n The result is that with fast heating we will pay (35,369 \u2013 25,212) = CZK 10,127<\/strong> more than with slow heating.<\/p>\n However, if we exceed the reserved capacity, then the penalty is four times the original value of the payment for the reserved capacity, i.e. not from CZK 176,388, but from CZK 705,552<\/strong>.<\/p>\n If we had a contracted maximum of 135 kW, and I exceed it at the stated 194 kW, then we will pay a penalty of 0.06 x CZK 705,552 = CZK 42,333 from the difference of 194-134 = 60 kW. Therefore, the reduced consumption mode with regard to the low ramp of 10 F\/min would be very expensive for us.<\/p>\n However, if we have contracted reserved capacity for 194 kW, and we only use it for 135 kW at a ramp of 10 F\/min, then our costs will be 34,219 + 1,400 = 35,619 CZK.<\/p>\n \u00a0<\/u><\/strong><\/p>\n Ramp 10 F\/min, with underutilization of the reserved capacity of 194 kW<\/u><\/strong><\/p>\n Consumption: \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 280 kWh * 5 = 1 400 K\u010d<\/p>\n Payment for reserved capacity of 194 kW:\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 176 388 * 0,194 = 34 219 K\u010d<\/p>\n Total: \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 1\u00a0400 + 34 219 = 35 619 K\u010d<\/strong><\/p>\n <\/p>\n Ramp 10 F\/min with exceeding reserved capacity \u00a0135 kW<\/u><\/strong><\/p>\n Consumption:\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 280 kWh * 5 = 1 400 K\u010d<\/p>\n Payment for reserved capacity of 135 kW: \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 176 388 * 0,135 = 34 219 K\u010d<\/p>\n Penalty for reserved capacity exceeding by 60 kW\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0705 552 * 0,06 = 42 333 K\u010d<\/p>\n Total: \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 1\u00a0400 + 34 219 +42\u00a0433 = 78 052 K\u010d<\/strong><\/p>\n <\/p>\n The above calculation shows that for the same technological result we can pay from CZK 25,212<\/strong> in the best variant to CZK 78,052<\/strong> in the worst variant. So, it is almost 3 times more. But it can also be seen that in this extreme case with one furnace, the own power consumption contributes to the total cost of electrical energy only from 2 to 4%. The majority of costs are tied to payments for reserved capacity.<\/p>\n With the number of devices and with their consistency in consumption, this ratio improves, even so, \u00bc maximum is a very sensitive parameter that we have to be very careful about.<\/p>\n So much for the contractual relationship with the energy supplier. However, if we also want to analyse energy consumption and energy costs per unit of goods, we must have a connection with the ERP system. But the energy measurement itself gives us only one data for our task. The other data must result from the ERP system, where we have data on the batch, weight, and number of pieces.<\/p>\n Only if we connect these two levels of data, we get direct access to our task, the calculation of the efficiency of heat treatment in terms of consumed energy in kWh\/kg, in kWh\/piece, in kWh\/hour.<\/p>\n![\"\"](\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/01\/optiener-tab.png\")
<\/a>![\"\"](\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2023\/01\/dxpg.jpg\")
<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n