{"id":12439,"date":"2026-03-29T10:07:30","date_gmt":"2026-03-29T10:07:30","guid":{"rendered":"https:\/\/www.jstconsultancy.cz\/?p=11333"},"modified":"2026-07-31T22:05:53","modified_gmt":"2026-07-31T22:05:53","slug":"soaking-time-ii","status":"publish","type":"post","link":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/en\/soaking-time-ii\/","title":{"rendered":"Soaking time II"},"content":{"rendered":"<p>In the first part, I thought about calculating the dwell time at the austenitization temperature. (<a href=\"\/?p=11217\">https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-soaking-time\/)<\/a><\/p>\n<p>The basis is the interpretation of aerospace standards, e.g.<\/p>\n<p><strong><em><u>AMS 2773 &#8211; Heat Treatment Cast Nickel Alloy and Cobalt Alloy Parts:\u00a0 <\/u><\/em><\/strong><\/p>\n<p><em>Soaking time starts when all furnace temperature sensors reach the specified set or offset temperature or, if load thermocouples (See 8.4.3) are used, when the coldest load thermocouple reaches the required temperature minus the appropriate tolerance (3.1.2.1).<\/em><\/p>\n<p><strong><em><u>AMS 2801 \u2013 Heat Treatment of Titanium Alloy Parts<\/u><\/em><\/strong><\/p>\n<p><em>3.2.5.4 Batch Furnaces &#8211; Method 4: When the temperature of at least two load sensors in contact with parts, positioned so as to reflect the temperature at the center of the coldest parts (See 3.2.5.4.1), reaches the half-tolerance temperature (See 3.2.5.2.2.1). If this method is used, the soaking time may be reduced to that shown in Table 2 for 0.10 inch (2.5 mm) thickness<\/em><\/p>\n<p><strong><em><u>Bombardier\u00a0 &#8211; Heat Treatment of aluminum alloys\u00a0<\/u><\/em><\/strong><\/p>\n<p><em>5.6 For all heat treating operations, the soaking time starts when all temperature control sensors reach the minimum of the uniformity tolerance range specified. For example, soaking time for solution heat treating of 2024 alloy, which has set temperature of 920 F and uniformity tolerance of \u00b110F, starts when all temperature control sensors reach 910 F<\/em><\/p>\n<p><strong><em><u>SAFRAN DMP11 \u2013 Heat Treatment\u00a0<\/u><\/em><\/strong><\/p>\n<p><em>9.6. Determining the industrial hold time<\/em><\/p>\n<p><em>The industrial hold time is the sum of:<\/em><\/p>\n<ul>\n<li><em>The soaking time;<\/em><\/li>\n<li><em>The difference in time between the moment when the furnace reaches the setting temperature and that when the core of the part reaches the minimum value of the heat treatment temperature.<\/em><\/li>\n<\/ul>\n<p><em>To determine the industrial hold time, the current steps are as follows. They are illustrated by the diagram below.<\/em><\/p>\n<p><a href=\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek2.png\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-11320\" src=\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek2-300x172.png\" alt=\"\" width=\"300\" height=\"172\" \/><\/a><\/p>\n<p><strong><em>Legends:<\/em><\/strong><\/p>\n<ul>\n<li><em>Curve R: recording of the regulation thermocouple.<\/em><\/li>\n<li><em>Curve Ch: recording of the hottest thermocouple.<\/em><\/li>\n<li><em>Curve Fr: recording of the coldest thermocouple.<\/em><\/li>\n<li><em>T: heat treatment temperature.<\/em><\/li>\n<li><em>T<sub>C<\/sub>: setting temperature.<\/em><\/li>\n<li><em>T<sub>min<\/sub>: minimum value of the heat treatment temperature.<\/em><\/li>\n<li><em>T<sub>max<\/sub>: maximum value of the heat treatment temperature.<\/em><\/li>\n<li><em>t: soaking time.<\/em><\/li>\n<li><em>t<sub>R<\/sub>: moment when the furnace reaches the setting temperature.<\/em><\/li>\n<li><em>t<sub>CH<\/sub>: moment when the hottest thermocouple reaches the minimum value of the heat treatment temperature.<\/em><\/li>\n<li><em>t<sub>Fr<\/sub>: moment when the coldest thermocouple reaches the minimum value of the heat treatment temperature.<\/em><\/li>\n<li><em>t<sub>min<\/sub>: minimum soaking time.<\/em><\/li>\n<li><em>t<sub>max<\/sub>: maximum soaking time.<\/em><\/li>\n<li><em>t<sub>F<\/sub>: end-of-treatment time, obtained when the temperature of the coldest thermocouple\u00a0<\/em><em>drops below the minimum treatment temperature. This time must lie between tmin and tmax.<\/em><\/li>\n<\/ul>\n<p><em>This standard further refines the calculation of the temperature dwell time by including the cooling time, where the end of the dwell time is considered to be the moment when the coldest thermocouple leaves the processing tolerance zone.<\/em><\/p>\n<p><strong><em><u>Liebherr Aerospace\u00a0 \u2013 Traitment Thermique<\/u><\/em><\/strong><\/p>\n<p><strong><em>6.5 Temps de maintien \u00e1 temperature\u00a0<\/em><\/strong><\/p>\n<p><em>Nota : Le temps de maintien est compt\u00e9 \u00e0 partir du moment o\u00f9 tous les points de la pi\u00e8ce sont \u00e0\u00a0<\/em><em>une temp\u00e9rature au moins \u00e9gale \u00e0 la valeur minimale de la tol\u00e9rance du traitement consid\u00e9r\u00e9.<\/em><\/p>\n<p>For other processes such as tempering, stress annealing, soft annealing, recrystallization annealing, normalizing annealing or even brazing, it will be similar. As soon as the coldest thermocouple reaches the set temperature minus half of the furnace tolerance band prescribed for the given technology, the dwell time calculation begins. The only difference is that for hardening it is usually +\/-14 C, for annealing processes or tempering it is different.<\/p>\n<p>This table shows the required tolerances according to various AMS 2759 standards and according to CQI-9.<\/p>\n<p><a href=\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek1.png\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-11322\" src=\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek1-300x170.png\" alt=\"\" width=\"300\" height=\"170\" \/><\/a><\/p>\n<p>Since the thermocouple measuring the temperature in the core, Tc (C \u2013 Core), will always be the coldest, if a temperature hold time is prescribed, it will begin when T<sub>C<\/sub> crosses the SP-T<sub>C<\/sub> line &lt; \u00bd the tolerance field. Therefore, if we temper according to AMS 2759\/1, the temperature tolerance is +\/- 6 \u00b0C and the time countdown occurs when the T<sub>C<\/sub> temperature crosses the SP- 6 \u00b0C line.<\/p>\n<p>In all cases, it must be noted that the decisive factor for assessing the temperature<strong> hold time is the value from the batch thermocouples, not the furnace temperature value.<\/strong><\/p>\n<p>Ji\u0159\u00ed Stanislav<\/p>\n<p>March 29, 2026<\/p>\n","protected":false},"excerpt":{"rendered":"<p>In the first part, I thought about calculating the dwell time at the austenitization temperature. (https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-soaking-time\/) The basis is the interpretation of aerospace standards, e.g. AMS<\/p>\n","protected":false},"author":12,"featured_media":13239,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[334],"tags":[],"class_list":["post-12439","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-technology-en"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.0 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Soaking time II - JST Consultancy<\/title>\n<meta name=\"robots\" content=\"noindex, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<meta property=\"og:locale\" content=\"cs_CZ\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Soaking time II - JST Consultancy\" \/>\n<meta property=\"og:description\" content=\"In the first part, I thought about calculating the dwell time at the austenitization temperature. (https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-soaking-time\/) The basis is the interpretation of aerospace standards, e.g. AMS\" \/>\n<meta property=\"og:url\" content=\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/\" \/>\n<meta property=\"og:site_name\" content=\"JST Consultancy\" \/>\n<meta property=\"article:published_time\" content=\"2026-03-29T10:07:30+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-31T22:05:53+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek6-kopie-2.png\" \/>\n\t<meta property=\"og:image:width\" content=\"650\" \/>\n\t<meta property=\"og:image:height\" content=\"441\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Ji\u0159\u00ed Stanislav\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Napsal(a)\" \/>\n\t<meta name=\"twitter:data1\" content=\"Ji\u0159\u00ed Stanislav\" \/>\n\t<meta name=\"twitter:label2\" content=\"Odhadovan\u00e1 doba \u010dten\u00ed\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minuty\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/\"},\"author\":{\"name\":\"Ji\u0159\u00ed Stanislav\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da\"},\"headline\":\"Soaking time II\",\"datePublished\":\"2026-03-29T10:07:30+00:00\",\"dateModified\":\"2026-07-31T22:05:53+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/\"},\"wordCount\":657,\"image\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek6-kopie-2.png\",\"articleSection\":[\"Technology\"],\"inLanguage\":\"cs\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/\",\"url\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/\",\"name\":\"Soaking time II - JST Consultancy\",\"isPartOf\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek6-kopie-2.png\",\"datePublished\":\"2026-03-29T10:07:30+00:00\",\"dateModified\":\"2026-07-31T22:05:53+00:00\",\"author\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da\"},\"breadcrumb\":{\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#breadcrumb\"},\"inLanguage\":\"cs\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"cs\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#primaryimage\",\"url\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek6-kopie-2.png\",\"contentUrl\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek6-kopie-2.png\",\"width\":650,\"height\":441},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Soaking time II\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#website\",\"url\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/\",\"name\":\"JST Consultancy\",\"description\":\"Tepeln\u00e9 zpracov\u00e1n\u00ed kov\u016f, expertn\u00ed \u010dinnost, ekonomick\u00e9 anal\u00fdzy kal\u00edren, \u0161kolen\u00ed tepeln\u00e9ho zpracov\u00e1n\u00ed\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"cs\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da\",\"name\":\"Ji\u0159\u00ed Stanislav\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Soaking time II - JST Consultancy","robots":{"index":"noindex","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"og_locale":"cs_CZ","og_type":"article","og_title":"Soaking time II - JST Consultancy","og_description":"In the first part, I thought about calculating the dwell time at the austenitization temperature. (https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/nadca-207-a-soaking-time\/) The basis is the interpretation of aerospace standards, e.g. AMS","og_url":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/","og_site_name":"JST Consultancy","article_published_time":"2026-03-29T10:07:30+00:00","article_modified_time":"2026-07-31T22:05:53+00:00","og_image":[{"width":650,"height":441,"url":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek6-kopie-2.png","type":"image\/png"}],"author":"Ji\u0159\u00ed Stanislav","twitter_card":"summary_large_image","twitter_misc":{"Napsal(a)":"Ji\u0159\u00ed Stanislav","Odhadovan\u00e1 doba \u010dten\u00ed":"3 minuty"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#article","isPartOf":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/"},"author":{"name":"Ji\u0159\u00ed Stanislav","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da"},"headline":"Soaking time II","datePublished":"2026-03-29T10:07:30+00:00","dateModified":"2026-07-31T22:05:53+00:00","mainEntityOfPage":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/"},"wordCount":657,"image":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#primaryimage"},"thumbnailUrl":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek6-kopie-2.png","articleSection":["Technology"],"inLanguage":"cs"},{"@type":"WebPage","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/","url":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/","name":"Soaking time II - JST Consultancy","isPartOf":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#website"},"primaryImageOfPage":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#primaryimage"},"image":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#primaryimage"},"thumbnailUrl":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek6-kopie-2.png","datePublished":"2026-03-29T10:07:30+00:00","dateModified":"2026-07-31T22:05:53+00:00","author":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da"},"breadcrumb":{"@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#breadcrumb"},"inLanguage":"cs","potentialAction":[{"@type":"ReadAction","target":["https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/"]}]},{"@type":"ImageObject","inLanguage":"cs","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#primaryimage","url":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek6-kopie-2.png","contentUrl":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-content\/uploads\/2026\/03\/457-obrazek6-kopie-2.png","width":650,"height":441},{"@type":"BreadcrumbList","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/soaking-time-ii\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/"},{"@type":"ListItem","position":2,"name":"Soaking time II"}]},{"@type":"WebSite","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#website","url":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/","name":"JST Consultancy","description":"Tepeln\u00e9 zpracov\u00e1n\u00ed kov\u016f, expertn\u00ed \u010dinnost, ekonomick\u00e9 anal\u00fdzy kal\u00edren, \u0161kolen\u00ed tepeln\u00e9ho zpracov\u00e1n\u00ed","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"cs"},{"@type":"Person","@id":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/#\/schema\/person\/44ac286f0ce5c80735a10e7a7860e1da","name":"Ji\u0159\u00ed Stanislav"}]}},"_links":{"self":[{"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/posts\/12439","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/comments?post=12439"}],"version-history":[{"count":1,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/posts\/12439\/revisions"}],"predecessor-version":[{"id":14304,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/posts\/12439\/revisions\/14304"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/media\/13239"}],"wp:attachment":[{"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/media?parent=12439"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/categories?post=12439"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/intelligent-kalam.80-240-27-133.plesk.page\/wp-json\/wp\/v2\/tags?post=12439"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}